- 영테크팩 요청사항 추가

V6.3.0 - OPT5 추가
 - 메시지 박스 사이즈 변경
   영문 4-13 메시지 짤리는 문제로 사이즈 늘림

INT69DB_2A/Controls/ControlMainDisplayDotGraph2.cs

@@ -105,7 +105,7 @@ namespace INT69DB_2A.Controls
             chartchPenStyle[0].m_chColor = Color.Yellow;
             chartchPenStyle[0].m_iPenWidth = 2;
 
-            draw.SetChartCfg(103, 310, 627, 290, 2, SmartX.SmartDraw.CHARTREFRESH.LEFTSCROLL, 1);
+            draw.SetChartCfg(103, 310, 627, 290, 16, SmartX.SmartDraw.CHARTREFRESH.LEFTSCROLL, 1);
             draw.ChartChannelPenStyle = chartchPenStyle;
         }
 

INT69DB_2A/Controls/ControlMainDisplayDotGraph3.cs

@@ -108,7 +108,7 @@ namespace INT69DB_2A.Controls
             chartchPenStyle[0].m_chColor = Color.Yellow;
             chartchPenStyle[0].m_iPenWidth = 2;
 
-            draw.SetChartCfg(103, 310, 627, 290, 2, SmartX.SmartDraw.CHARTREFRESH.LEFTSCROLL, 1);
+            draw.SetChartCfg(103, 310, 627, 290, 16, SmartX.SmartDraw.CHARTREFRESH.LEFTSCROLL, 1);
             draw.ChartChannelPenStyle = chartchPenStyle;
         }
 

INT69DB_2A/Controls/ControlMainDisplayDotGraph4.cs

@@ -111,7 +111,7 @@ namespace INT69DB_2A.Controls
             chartchPenStyle[0].m_chColor = Color.Yellow;
             chartchPenStyle[0].m_iPenWidth = 2;
 
-            draw.SetChartCfg(103, 310, 627, 290, 2, SmartX.SmartDraw.CHARTREFRESH.LEFTSCROLL, 1);
+            draw.SetChartCfg(103, 310, 627, 290, 16, SmartX.SmartDraw.CHARTREFRESH.LEFTSCROLL, 1);
             draw.ChartChannelPenStyle = chartchPenStyle;
         }
 

INT69DB_2A/Controls/ControlMainDisplayDotGraph5.cs

@@ -114,7 +114,7 @@ namespace INT69DB_2A.Controls
             chartchPenStyle[0].m_chColor = Color.Yellow;
             chartchPenStyle[0].m_iPenWidth = 2;
 
-            draw.SetChartCfg(103, 310, 627, 290, 2, SmartX.SmartDraw.CHARTREFRESH.LEFTSCROLL, 1);
+            draw.SetChartCfg(103, 310, 627, 290, 16, SmartX.SmartDraw.CHARTREFRESH.LEFTSCROLL, 1);
             draw.ChartChannelPenStyle = chartchPenStyle;
         }
 

INT69DB_2A/Controls/ControlMainDisplayDotGraph6.cs

@@ -117,7 +117,7 @@ namespace INT69DB_2A.Controls
             chartchPenStyle[0].m_chColor = Color.Yellow;
             chartchPenStyle[0].m_iPenWidth = 2;
 
-            draw.SetChartCfg(103, 310, 627, 290, 2, SmartX.SmartDraw.CHARTREFRESH.LEFTSCROLL, 1);
+            draw.SetChartCfg(103, 310, 627, 290, 16, SmartX.SmartDraw.CHARTREFRESH.LEFTSCROLL, 1);
             draw.ChartChannelPenStyle = chartchPenStyle;
         }
 

INT69DB_2A/Controls/ControlMainDisplayDotGraph7.cs

@@ -120,7 +120,7 @@ namespace INT69DB_2A.Controls
             chartchPenStyle[0].m_chColor = Color.Yellow;
             chartchPenStyle[0].m_iPenWidth = 2;
 
-            draw.SetChartCfg(103, 310, 627, 290, 2, SmartX.SmartDraw.CHARTREFRESH.LEFTSCROLL, 1);
+            draw.SetChartCfg(103, 310, 627, 290, 16, SmartX.SmartDraw.CHARTREFRESH.LEFTSCROLL, 1);
             draw.ChartChannelPenStyle = chartchPenStyle;
         }
 

INT69DB_2A/Controls/ControlMainDisplayDotGraph8.cs

@@ -123,7 +123,7 @@ namespace INT69DB_2A.Controls
             chartchPenStyle[0].m_chColor = Color.Yellow;
             chartchPenStyle[0].m_iPenWidth = 2;
 
-            draw.SetChartCfg(103, 310, 627, 290, 2, SmartX.SmartDraw.CHARTREFRESH.LEFTSCROLL, 1);
+            draw.SetChartCfg(103, 310, 627, 290, 16, SmartX.SmartDraw.CHARTREFRESH.LEFTSCROLL, 1);
             draw.ChartChannelPenStyle = chartchPenStyle;
         }
 

INT69DB_2A/DataStore.cs

@@ -46,7 +46,7 @@ namespace INT69DB_2A
         public enum MainDisplayStore
         {
             BarGraph,
-            LineGraph,
+            DotGraph,
             Table,
         };
 
@@ -346,6 +346,7 @@ namespace INT69DB_2A
             f3_OPT3,
             f4_Printer,
             f5_OPT4,
+            f6_OPT5,
         }
 
         public enum EthernetMode
@@ -356,6 +357,7 @@ namespace INT69DB_2A
             f3_OPT3,
             f4_Modbus,
             f5_OPT4,
+            f6_OPT5,
         }
 
         public enum UserGroup

INT69DB_2A/DialogForms/DialogFormMessage.designer.cs

@@ -30,15 +30,15 @@
         {
             System.ComponentModel.ComponentResourceManager resources = new System.ComponentModel.ComponentResourceManager(typeof(DialogFormMessage));
             this.panel1 = new System.Windows.Forms.Panel();
+            this.pictureBoxExclamation = new System.Windows.Forms.PictureBox();
+            this.pictureBoxHand = new System.Windows.Forms.PictureBox();
+            this.pictureBoxAsterisk = new System.Windows.Forms.PictureBox();
+            this.pictureBoxQuestion = new System.Windows.Forms.PictureBox();
             this.labelMessage2 = new System.Windows.Forms.Label();
             this.labelMessage1 = new System.Windows.Forms.Label();
             this.buttonOK = new System.Windows.Forms.Button();
             this.labelErrorCode = new System.Windows.Forms.Label();
             this.timerAutoClose = new System.Windows.Forms.Timer();
-            this.pictureBoxExclamation = new System.Windows.Forms.PictureBox();
-            this.pictureBoxHand = new System.Windows.Forms.PictureBox();
-            this.pictureBoxAsterisk = new System.Windows.Forms.PictureBox();
-            this.pictureBoxQuestion = new System.Windows.Forms.PictureBox();
             this.panel1.SuspendLayout();
             this.SuspendLayout();
             // 
@@ -51,30 +51,61 @@
             this.panel1.Controls.Add(this.pictureBoxQuestion);
             this.panel1.Controls.Add(this.labelMessage2);
             this.panel1.Controls.Add(this.labelMessage1);
-            this.panel1.Location = new System.Drawing.Point(15, 34);
+            this.panel1.Location = new System.Drawing.Point(3, 34);
             this.panel1.Name = "panel1";
-            this.panel1.Size = new System.Drawing.Size(420, 95);
+            this.panel1.Size = new System.Drawing.Size(444, 95);
+            // 
+            // pictureBoxExclamation
+            // 
+            this.pictureBoxExclamation.Image = ((System.Drawing.Image)(resources.GetObject("pictureBoxExclamation.Image")));
+            this.pictureBoxExclamation.Location = new System.Drawing.Point(5, 20);
+            this.pictureBoxExclamation.Name = "pictureBoxExclamation";
+            this.pictureBoxExclamation.Size = new System.Drawing.Size(50, 50);
+            // 
+            // pictureBoxHand
+            // 
+            this.pictureBoxHand.Image = ((System.Drawing.Image)(resources.GetObject("pictureBoxHand.Image")));
+            this.pictureBoxHand.Location = new System.Drawing.Point(5, 20);
+            this.pictureBoxHand.Name = "pictureBoxHand";
+            this.pictureBoxHand.Size = new System.Drawing.Size(50, 50);
+            this.pictureBoxHand.Visible = false;
+            // 
+            // pictureBoxAsterisk
+            // 
+            this.pictureBoxAsterisk.Image = ((System.Drawing.Image)(resources.GetObject("pictureBoxAsterisk.Image")));
+            this.pictureBoxAsterisk.Location = new System.Drawing.Point(5, 20);
+            this.pictureBoxAsterisk.Name = "pictureBoxAsterisk";
+            this.pictureBoxAsterisk.Size = new System.Drawing.Size(50, 50);
+            this.pictureBoxAsterisk.Visible = false;
+            // 
+            // pictureBoxQuestion
+            // 
+            this.pictureBoxQuestion.Image = ((System.Drawing.Image)(resources.GetObject("pictureBoxQuestion.Image")));
+            this.pictureBoxQuestion.Location = new System.Drawing.Point(5, 20);
+            this.pictureBoxQuestion.Name = "pictureBoxQuestion";
+            this.pictureBoxQuestion.Size = new System.Drawing.Size(50, 50);
+            this.pictureBoxQuestion.Visible = false;
             // 
             // labelMessage2
             // 
-            this.labelMessage2.Font = new System.Drawing.Font("새굴림", 10F, System.Drawing.FontStyle.Regular);
-            this.labelMessage2.Location = new System.Drawing.Point(67, 50);
+            this.labelMessage2.Font = new System.Drawing.Font("New Gulim", 10F, System.Drawing.FontStyle.Regular);
+            this.labelMessage2.Location = new System.Drawing.Point(57, 50);
             this.labelMessage2.Name = "labelMessage2";
-            this.labelMessage2.Size = new System.Drawing.Size(350, 20);
+            this.labelMessage2.Size = new System.Drawing.Size(387, 20);
             this.labelMessage2.Text = "COM2 port problem. Please contact a manufacturer.";
             // 
             // labelMessage1
             // 
-            this.labelMessage1.Font = new System.Drawing.Font("새굴림", 10F, System.Drawing.FontStyle.Regular);
-            this.labelMessage1.Location = new System.Drawing.Point(67, 20);
+            this.labelMessage1.Font = new System.Drawing.Font("New Gulim", 10F, System.Drawing.FontStyle.Regular);
+            this.labelMessage1.Location = new System.Drawing.Point(57, 20);
             this.labelMessage1.Name = "labelMessage1";
-            this.labelMessage1.Size = new System.Drawing.Size(350, 20);
+            this.labelMessage1.Size = new System.Drawing.Size(387, 20);
             this.labelMessage1.Text = "COM2 port problem. Please contact a manufacturer.";
             // 
             // buttonOK
             // 
             this.buttonOK.BackColor = System.Drawing.Color.LightGray;
-            this.buttonOK.Font = new System.Drawing.Font("새굴림", 10F, System.Drawing.FontStyle.Bold);
+            this.buttonOK.Font = new System.Drawing.Font("New Gulim", 10F, System.Drawing.FontStyle.Bold);
             this.buttonOK.ForeColor = System.Drawing.Color.Black;
             this.buttonOK.Location = new System.Drawing.Point(335, 135);
             this.buttonOK.Name = "buttonOK";
@@ -86,7 +117,7 @@
             // 
             // labelErrorCode
             // 
-            this.labelErrorCode.Font = new System.Drawing.Font("새굴림", 10F, System.Drawing.FontStyle.Bold);
+            this.labelErrorCode.Font = new System.Drawing.Font("New Gulim", 10F, System.Drawing.FontStyle.Bold);
             this.labelErrorCode.Location = new System.Drawing.Point(15, 11);
             this.labelErrorCode.Name = "labelErrorCode";
             this.labelErrorCode.Size = new System.Drawing.Size(350, 20);
@@ -97,37 +128,6 @@
             this.timerAutoClose.Interval = 1000;
             this.timerAutoClose.Tick += new System.EventHandler(this.timerAutoClose_Tick);
             // 
-            // pictureBoxExclamation
-            // 
-            this.pictureBoxExclamation.Image = ((System.Drawing.Image)(resources.GetObject("pictureBoxExclamation.Image")));
-            this.pictureBoxExclamation.Location = new System.Drawing.Point(11, 20);
-            this.pictureBoxExclamation.Name = "pictureBoxExclamation";
-            this.pictureBoxExclamation.Size = new System.Drawing.Size(50, 50);
-            // 
-            // pictureBoxHand
-            // 
-            this.pictureBoxHand.Image = ((System.Drawing.Image)(resources.GetObject("pictureBoxHand.Image")));
-            this.pictureBoxHand.Location = new System.Drawing.Point(11, 20);
-            this.pictureBoxHand.Name = "pictureBoxHand";
-            this.pictureBoxHand.Size = new System.Drawing.Size(50, 50);
-            this.pictureBoxHand.Visible = false;
-            // 
-            // pictureBoxAsterisk
-            // 
-            this.pictureBoxAsterisk.Image = ((System.Drawing.Image)(resources.GetObject("pictureBoxAsterisk.Image")));
-            this.pictureBoxAsterisk.Location = new System.Drawing.Point(11, 20);
-            this.pictureBoxAsterisk.Name = "pictureBoxAsterisk";
-            this.pictureBoxAsterisk.Size = new System.Drawing.Size(50, 50);
-            this.pictureBoxAsterisk.Visible = false;
-            // 
-            // pictureBoxQuestion
-            // 
-            this.pictureBoxQuestion.Image = ((System.Drawing.Image)(resources.GetObject("pictureBoxQuestion.Image")));
-            this.pictureBoxQuestion.Location = new System.Drawing.Point(11, 20);
-            this.pictureBoxQuestion.Name = "pictureBoxQuestion";
-            this.pictureBoxQuestion.Size = new System.Drawing.Size(50, 50);
-            this.pictureBoxQuestion.Visible = false;
-            // 
             // DialogFormMessage
             // 
             this.AutoScaleDimensions = new System.Drawing.SizeF(96F, 96F);

INT69DB_2A/DialogForms/DialogFormUserEditorKeyboard.Designer.cs

@@ -46,7 +46,7 @@
             // textBox
             // 
             this.textBox.Font = new System.Drawing.Font("Tahoma", 25F, System.Drawing.FontStyle.Regular);
-            this.textBox.Location = new System.Drawing.Point(143, 99);
+            this.textBox.Location = new System.Drawing.Point(143, 80);
             this.textBox.MaxLength = 20;
             this.textBox.Name = "textBox";
             this.textBox.Size = new System.Drawing.Size(489, 47);
@@ -104,17 +104,18 @@
             this.labelTitle.BackPictureBox2 = null;
             this.labelTitle.BorderColor = System.Drawing.Color.Black;
             this.labelTitle.BorderStyle = System.Windows.Forms.BorderStyle.None;
-            this.labelTitle.Font = new System.Drawing.Font("새굴림", 20F, System.Drawing.FontStyle.Bold);
+            this.labelTitle.Font = new System.Drawing.Font("New Gulim", 20F, System.Drawing.FontStyle.Bold);
             this.labelTitle.ForeColor = System.Drawing.Color.Gray;
             this.labelTitle.InitVisible = true;
             this.labelTitle.LineSpacing = 0F;
-            this.labelTitle.Location = new System.Drawing.Point(143, 43);
+            this.labelTitle.Location = new System.Drawing.Point(143, 16);
             this.labelTitle.Name = "labelTitle";
             this.labelTitle.Size = new System.Drawing.Size(489, 50);
             this.labelTitle.TabIndex = 183;
             this.labelTitle.Text = "입력";
             this.labelTitle.TextHAlign = SmartX.SmartLabel.TextHorAlign.Middle;
             this.labelTitle.TextVAlign = SmartX.SmartLabel.TextVerAlign.Middle;
+            this.labelTitle.Visible = false;
             this.labelTitle.Wordwrap = false;
             // 
             // DialogFormUserEditorKeyboard

INT69DB_2A/Forms/FormCommunication.cs

@@ -122,6 +122,7 @@ namespace INT69DB_2A.Forms
             this.comboBoxMode.Items.Add("OPT3");
             this.comboBoxMode.Items.Add("Modbus");
             this.comboBoxMode.Items.Add("OPT4");
+            this.comboBoxMode.Items.Add("OPT5");
             this.comboBoxMode.SelectedIndex = 0;
             this.comboBoxMode.SelectedIndexChanged += new EventHandler(this.comboBoxMode_SelectedIndexChanged);
 
@@ -142,6 +143,7 @@ namespace INT69DB_2A.Forms
             this.comboBoxSerial3Mode.Items.Add("OPT3");
             this.comboBoxSerial3Mode.Items.Add("Printer");
             this.comboBoxSerial3Mode.Items.Add("OPT4");
+            this.comboBoxSerial3Mode.Items.Add("OPT5");
             this.comboBoxSerial3Mode.SelectedIndex = 0;
             this.comboBoxSerial3Mode.SelectedIndexChanged += new EventHandler(this.comboBoxSerial3Mode_SelectedIndexChanged);
         }
@@ -300,6 +302,13 @@ namespace INT69DB_2A.Forms
                     else if (this.ParentForm.SystemConfig.EquipmentMode == 2)
                         data = this.ParentForm.Protocol_OPT4(1, this.ParentForm.CollectionWeightData[0]);
                 }
+                else if (this.ParentForm.SystemConfig.EthernetMode == (int)DataStore.EthernetMode.f6_OPT5)
+                {
+                    if (this.ParentForm.SystemConfig.EquipmentMode == 1)
+                        data = this.ParentForm.Protocol_OPT5(this.ParentForm.CollectionWeightData);
+                    else if (this.ParentForm.SystemConfig.EquipmentMode == 2)
+                        data = this.ParentForm.Protocol_OPT5(1, this.ParentForm.CollectionWeightData[0]);
+                }
 
                 switch (this.ParentForm.SystemConfig.EthernetOperationMode)
                 {
@@ -386,7 +395,14 @@ namespace INT69DB_2A.Forms
         private void UpdateDisplayCom3()
         {
             this.comboBoxSerial3BaudRate.SelectedIndexChanged -= new EventHandler(this.comboBoxSerial3BaudRate_SelectedIndexChanged);
-            this.comboBoxSerial3BaudRate.SelectedItem = this.ParentForm.SystemConfig.Serial3BaudRate;
+            try
+            {
+                this.comboBoxSerial3BaudRate.SelectedIndex = this.ParentForm.SystemConfig.Serial3BaudRate;
+            }
+            catch
+            {
+                this.comboBoxSerial3BaudRate.SelectedIndex = 0;
+            }
             this.comboBoxSerial3BaudRate.SelectedIndexChanged += new EventHandler(this.comboBoxSerial3BaudRate_SelectedIndexChanged);
 
             this.comboBoxSerial3Mode.SelectedIndexChanged -= new EventHandler(this.comboBoxSerial3Mode_SelectedIndexChanged);
@@ -464,6 +480,19 @@ namespace INT69DB_2A.Forms
                     this.labelProtocolDescriptionCOM3_2.Text = "LANE[2],GRD[1],WEIGHT[6],ETX[1]]";
                 }
             }
+            else if (this.comboBoxSerial3Mode.SelectedIndex == 6)
+            {
+                if (this.ParentForm.SystemConfig.EquipmentMode == 1 || this.ParentForm.SystemConfig.EquipmentMode == 3)
+                {
+                    this.labelProtocolDescriptionCOM3_1.Text = "STX[1],ID[5],NO[4],Pass Count[7],NG Count[7],";
+                    this.labelProtocolDescriptionCOM3_2.Text = "Total Count[9],{GRD[1],WEIGHT[6]} * n,ETX[1]";
+                }
+                else if (this.ParentForm.SystemConfig.EquipmentMode == 2)
+                {
+                    this.labelProtocolDescriptionCOM3_1.Text = "STX[1],ID[5],NO[4],Pass Count[7],NG Count[7],";
+                    this.labelProtocolDescriptionCOM3_2.Text = "Total Count[9],LANE[2],GRD[1],WEIGHT[6],ETX[1]]";
+                }
+            }
             else
             {
                 if (this.ParentForm.SystemConfig.Language == DataStore.LanguageID.Chinese)
@@ -537,6 +566,19 @@ namespace INT69DB_2A.Forms
                     this.labelProtocolDescriptionEthernet_2.Text = "LANE[2],GRD[1],WEIGHT[6],ETX[1]]";
                 }
             }
+            else if (this.comboBoxMode.SelectedIndex == (int)DataStore.EthernetMode.f6_OPT5)
+            {
+                if (this.ParentForm.SystemConfig.EquipmentMode == 1 || this.ParentForm.SystemConfig.EquipmentMode == 3)
+                {
+                    this.labelProtocolDescriptionEthernet_1.Text = "STX[1],ID[5],NO[4],Pass Count[7],NG Count[7],";
+                    this.labelProtocolDescriptionEthernet_2.Text = "Total Count[9],{GRD[1],WEIGHT[6]} * n,ETX[1]";
+                }
+                else if (this.ParentForm.SystemConfig.EquipmentMode == 2)
+                {
+                    this.labelProtocolDescriptionEthernet_1.Text = "STX[1],ID[5],NO[4],Pass Count[7],NG Count[7],";
+                    this.labelProtocolDescriptionEthernet_2.Text = "Total Count[9],LANE[2],GRD[1],WEIGHT[6],ETX[1]]";
+                }
+            }
             else
             {
                 if (this.ParentForm.SystemConfig.Language == DataStore.LanguageID.Chinese)
@@ -1472,7 +1514,7 @@ namespace INT69DB_2A.Forms
             beforeMode = this.ReturnCommunicationModeName(comboBox, this.ParentForm.SystemConfig.Serial3Mode);
             beforeBaudrate = this.ParentForm.SystemConfig.Serial3BaudRate.ToString();
 
-            this.ParentForm.SystemConfig.Serial3BaudRate = (int)this.comboBoxSerial3BaudRate.SelectedItem;
+            this.ParentForm.SystemConfig.Serial3BaudRate = this.comboBoxSerial3BaudRate.SelectedIndex;
             this.ParentForm.SystemConfig.Serial3Mode = this.comboBoxSerial3Mode.SelectedIndex;
 
             afterMode = this.ReturnCommunicationModeName(comboBox, this.ParentForm.SystemConfig.Serial3Mode);
@@ -1500,6 +1542,25 @@ namespace INT69DB_2A.Forms
                         this.ParentForm.smartSerialPortCom3.FrameSeparationType = SmartSerialPort.FRAMESEPARATIONTYPES.STXANDETX;
                         break;
                 }
+
+                switch (this.ParentForm.SystemConfig.Serial3BaudRate)
+                {
+                    case 0:
+                        this.ParentForm.smartSerialPortCom3.Baud_Rate = SmartSerialPort.BAUDRATE._9600bps;
+                        break;
+                    case 1:
+                        this.ParentForm.smartSerialPortCom3.Baud_Rate = SmartSerialPort.BAUDRATE._19200bps;
+                        break;
+                    case 2:
+                        this.ParentForm.smartSerialPortCom3.Baud_Rate = SmartSerialPort.BAUDRATE._38400bps;
+                        break;
+                    case 3:
+                        this.ParentForm.smartSerialPortCom3.Baud_Rate = SmartSerialPort.BAUDRATE._115200bps;
+                        break;
+                    default:
+                        this.ParentForm.smartSerialPortCom3.Baud_Rate = SmartSerialPort.BAUDRATE._9600bps;
+                        break;
+                }
                 this.ParentForm.smartSerialPortCom3.Open();
 
                 this.buttonSerialSend.Enabled = true;
@@ -1548,6 +1609,13 @@ namespace INT69DB_2A.Forms
                 else if (this.ParentForm.SystemConfig.EquipmentMode == 2)
                     this.ParentForm.UartCom3Write(this.ParentForm.Protocol_OPT4_NotStxEtx(1, this.ParentForm.CollectionWeightData[0]));
             }
+            else if (this.ParentForm.SystemConfig.Serial3Mode == (int)DataStore.SerialMode.f6_OPT5)
+            {
+                if (this.ParentForm.SystemConfig.EquipmentMode == 1 || this.ParentForm.SystemConfig.EquipmentMode == 3)
+                    this.ParentForm.UartCom3Write(this.ParentForm.Protocol_OPT5_NotStxEtx(this.ParentForm.CollectionWeightData));
+                else if (this.ParentForm.SystemConfig.EquipmentMode == 2)
+                    this.ParentForm.UartCom3Write(this.ParentForm.Protocol_OPT5_NotStxEtx(1, this.ParentForm.CollectionWeightData[0]));
+            }
         }
 
         private void comboBoxSerial3BaudRate_SelectedIndexChanged(object sender, EventArgs e)

INT69DB_2A/Forms/FormConfiguration.cs

@@ -572,13 +572,11 @@ namespace INT69DB_2A.Forms
             string before = "", after = "";
             before = this.comboBoxDecimalPlaces.Items.IndexOf(this.ParentForm.SystemConfig.DecimalPlaces).ToString();
             this.ParentForm.SystemConfig.DecimalPlaces = this.comboBoxDecimalPlaces.SelectedIndex;
+            this.ParentForm.SaveSystemConfigurationFile(this.ParentForm.SystemConfig);
             after = this.comboBoxDecimalPlaces.SelectedItem.ToString();
 
             if (this.ParentForm.SystemConfig.IsPart11 == true)
                 this.ParentForm.SetTrackingHistoryData(DataStore.TrackingParameter.EtcDecimalpoint, "", before, after);
-
-                if (this.ParentForm.SystemConfig.IsPart11 == true)
-                    this.ParentForm.SaveSystemConfigurationFile(this.ParentForm.SystemConfig);
         }
 
         private void labelAlarmContinuousNG_Click(object sender, EventArgs e)

INT69DB_2A/Forms/FormInformation.cs

@@ -107,7 +107,7 @@ namespace INT69DB_2A.Forms
         }
         private void DefaultSetting()
         {
-            this.labelDisplayVer.Text = "5.2.2";
+            this.labelDisplayVer.Text = "5.3.0";
             this.labelUserMgerVer.Text = "";
             this.labelAes128Ver.Text = "";
             this.labelSerialNo.Text = this.ParentForm.SystemConfig.SerialNumber;

INT69DB_2A/Forms/FormMain.Designer.cs

@@ -42,6 +42,7 @@
             this.timerUserList = new System.Windows.Forms.Timer();
             this.timerTimeOutTransmission = new System.Windows.Forms.Timer();
             this.smartSerialPortCom3 = new SmartX.SmartSerialPort();
+            this.smartFileCom3Log = new SmartX.SmartFile();
             ((System.ComponentModel.ISupportInitialize)(this.smartForm)).BeginInit();
             this.SuspendLayout();
             // 
@@ -145,6 +146,10 @@
             this.smartSerialPortCom3.STXCodes = null;
             this.smartSerialPortCom3.TailErrorCodeOffset = 0;
             // 
+            // smartFileCom3Log
+            // 
+            this.smartFileCom3Log.FilePathName = null;
+            // 
             // FormMain
             // 
             this.AutoScaleDimensions = new System.Drawing.SizeF(96F, 96F);
@@ -174,6 +179,7 @@
         private System.Windows.Forms.Timer timerUserList;
         public System.Windows.Forms.Timer timerTimeOutTransmission;
         public SmartX.SmartSerialPort smartSerialPortCom3;
+        public SmartX.SmartFile smartFileCom3Log;
 
     }
 }

INT69DB_2A/Forms/FormMain.cs

@@ -1467,6 +1467,205 @@ namespace INT69DB_2A.Forms
             return sb.ToString();
         }
 
+        public string Protocol_OPT5(Collection<WeightData> datas)
+        {
+            string value = "";
+            int toTalAll = 0, toTalPass = 0, totalNg = 0;
+            StringBuilder sb = new StringBuilder();
+
+            for (int i = 0; i < this.SystemConfig.EquipmentColumns; i++)
+            {
+                toTalAll += datas[i].TotalCount;
+                toTalPass += datas[i].PassCount;
+                totalNg += datas[i].TotalNGCount;
+            }
+
+            sb.Append((char)0x02);
+            sb.Append(string.Format("IN{0:D3}", this.SystemConfig.EquipmentID));
+            sb.Append(string.Format("{0:D4}", this.SystemConfig.ProductNumber));
+
+            value = toTalPass.ToString();
+            sb.Append(value.PadLeft(7, ' '));
+            value = totalNg.ToString();
+            sb.Append(value.PadLeft(7, ' '));
+            value = toTalAll.ToString();
+            sb.Append(value.PadLeft(9, ' '));
+
+            if (this.SystemConfig.IsWeightViewForward == true)
+            {
+                for (int i = 0; i < this.SystemConfig.EquipmentColumns; i++)
+                {
+                    if (datas[i].JudgmentStatus == DataStore.JudgmentStatus.Under)
+                        sb.Append("U");
+                    else if (datas[i].JudgmentStatus == DataStore.JudgmentStatus.Over)
+                        sb.Append("O");
+                    else if (datas[i].JudgmentStatus == DataStore.JudgmentStatus.Double)
+                        sb.Append("D");
+                    else if (datas[i].JudgmentStatus == DataStore.JudgmentStatus.Pass)
+                        sb.Append("P");
+                    else
+                        sb.Append("E");
+
+                    value = Helper.DoubleToString(datas[i].Weight, this.SystemConfig.DecimalPlaces);
+                    sb.Append(value.PadLeft(6, ' '));
+                }
+            }
+            else
+            {
+                for (int i = 1; i <= this.SystemConfig.EquipmentColumns; i++)
+                {
+                    if (datas[datas.Count - i].JudgmentStatus == DataStore.JudgmentStatus.Under)
+                        sb.Append("U");
+                    else if (datas[datas.Count - i].JudgmentStatus == DataStore.JudgmentStatus.Pass)
+                        sb.Append("P");
+                    else if (datas[datas.Count - i].JudgmentStatus == DataStore.JudgmentStatus.Over)
+                        sb.Append("O");
+                    else if (datas[datas.Count - i].JudgmentStatus == DataStore.JudgmentStatus.Double)
+                        sb.Append("D");
+                    else
+                        sb.Append("E");
+
+                    value = Helper.DoubleToString(datas[datas.Count - i].Weight, this.SystemConfig.DecimalPlaces);
+                    sb.Append(value.PadLeft(6, ' '));
+                }
+            }
+            sb.Append((char)0x03);
+
+            return sb.ToString();
+        }
+        public string Protocol_OPT5(int lane, WeightData data)
+        {
+            string value = "";
+            StringBuilder sb = new StringBuilder();
+
+            sb.Append((char)0x02);
+            sb.Append(string.Format("IN{0:D3}", this.SystemConfig.EquipmentID));
+            sb.Append(string.Format("{0:D4}", this.SystemConfig.ProductNumber));
+
+            value = data.PassCount.ToString();
+            sb.Append(value.PadLeft(7, ' '));
+            value = data.TotalNGCount.ToString();
+            sb.Append(value.PadLeft(7, ' '));
+            value = data.TotalCount.ToString();
+            sb.Append(value.PadLeft(9, ' '));
+
+            sb.Append(string.Format("{0:D2}", lane));
+
+            if (data.JudgmentStatus == DataStore.JudgmentStatus.Under)
+                sb.Append("U");
+            else if (data.JudgmentStatus == DataStore.JudgmentStatus.Over)
+                sb.Append("O");
+            else if (data.JudgmentStatus == DataStore.JudgmentStatus.Double)
+                sb.Append("D");
+            else if (data.JudgmentStatus == DataStore.JudgmentStatus.Pass)
+                sb.Append("P");
+            else
+                sb.Append("E");
+
+            value = Helper.DoubleToString(data.Weight, this.SystemConfig.DecimalPlaces);
+            sb.Append(value.PadLeft(6, ' '));
+            sb.Append((char)0x03);
+
+            return sb.ToString();
+        }
+        public string Protocol_OPT5_NotStxEtx(Collection<WeightData> datas)
+        {
+            string value = "";
+            int toTalAll = 0, toTalPass = 0, totalNg = 0;
+            StringBuilder sb = new StringBuilder();
+
+            for (int i = 0; i < this.SystemConfig.EquipmentColumns; i++)
+            {
+                toTalAll += datas[i].TotalCount;
+                toTalPass += datas[i].PassCount;
+                totalNg += datas[i].TotalNGCount;
+            }
+
+            sb.Append(string.Format("IN{0:D3}", this.SystemConfig.EquipmentID));
+            sb.Append(string.Format("{0:D4}", this.SystemConfig.ProductNumber));
+
+            value = toTalPass.ToString();
+            sb.Append(value.PadLeft(7, ' '));
+            value = totalNg.ToString();
+            sb.Append(value.PadLeft(7, ' '));
+            value = toTalAll.ToString();
+            sb.Append(value.PadLeft(9, ' '));
+
+            if (this.SystemConfig.IsWeightViewForward == true)
+            {
+                for (int i = 0; i < this.SystemConfig.EquipmentColumns; i++)
+                {
+                    if (datas[i].JudgmentStatus == DataStore.JudgmentStatus.Under)
+                        sb.Append("U");
+                    else if (datas[i].JudgmentStatus == DataStore.JudgmentStatus.Over)
+                        sb.Append("O");
+                    else if (datas[i].JudgmentStatus == DataStore.JudgmentStatus.Double)
+                        sb.Append("D");
+                    else if (datas[i].JudgmentStatus == DataStore.JudgmentStatus.Pass)
+                        sb.Append("P");
+                    else
+                        sb.Append("E");
+
+                    value = Helper.DoubleToString(datas[i].Weight, this.SystemConfig.DecimalPlaces);
+                    sb.Append(value.PadLeft(6, ' '));
+                }
+            }
+            else
+            {
+                for (int i = 1; i <= this.SystemConfig.EquipmentColumns; i++)
+                {
+                    if (datas[datas.Count - i].JudgmentStatus == DataStore.JudgmentStatus.Under)
+                        sb.Append("U");
+                    else if (datas[datas.Count - i].JudgmentStatus == DataStore.JudgmentStatus.Pass)
+                        sb.Append("P");
+                    else if (datas[datas.Count - i].JudgmentStatus == DataStore.JudgmentStatus.Over)
+                        sb.Append("O");
+                    else if (datas[datas.Count - i].JudgmentStatus == DataStore.JudgmentStatus.Double)
+                        sb.Append("D");
+                    else
+                        sb.Append("E");
+
+                    value = Helper.DoubleToString(datas[datas.Count - i].Weight, this.SystemConfig.DecimalPlaces);
+                    sb.Append(value.PadLeft(6, ' '));
+                }
+            }
+
+            return sb.ToString();
+        }
+        public string Protocol_OPT5_NotStxEtx(int lane, WeightData data)
+        {
+            string value = "";
+            StringBuilder sb = new StringBuilder();
+
+            sb.Append(string.Format("IN{0:D3}", this.SystemConfig.EquipmentID));
+            sb.Append(string.Format("{0:D4}", this.SystemConfig.ProductNumber));
+
+            value = data.PassCount.ToString();
+            sb.Append(value.PadLeft(7, ' '));
+            value = data.TotalNGCount.ToString();
+            sb.Append(value.PadLeft(7, ' '));
+            value = data.TotalCount.ToString();
+            sb.Append(value.PadLeft(9, ' '));
+
+            sb.Append(string.Format("{0:D2}", lane));
+
+            if (data.JudgmentStatus == DataStore.JudgmentStatus.Under)
+                sb.Append("U");
+            else if (data.JudgmentStatus == DataStore.JudgmentStatus.Over)
+                sb.Append("O");
+            else if (data.JudgmentStatus == DataStore.JudgmentStatus.Double)
+                sb.Append("D");
+            else if (data.JudgmentStatus == DataStore.JudgmentStatus.Pass)
+                sb.Append("P");
+            else
+                sb.Append("E");
+
+            value = Helper.DoubleToString(data.Weight, this.SystemConfig.DecimalPlaces);
+            sb.Append(value.PadLeft(6, ' '));
+
+            return sb.ToString();
+        }
+
         public byte[] Protocol_Modbus_Client_Write_Common_Data()
         {
             int index = 0;
@@ -2938,6 +3137,9 @@ namespace INT69DB_2A.Forms
                     case 5:
                         this.UartCom3Write(this.Protocol_OPT4_NotStxEtx(datas));
                         break;
+                    case 6:
+                        this.UartCom3Write(this.Protocol_OPT5_NotStxEtx(datas));
+                        break;
                     default:
                         break;
                 }
@@ -3010,6 +3212,7 @@ namespace INT69DB_2A.Forms
             {
                 try
                 {
+                    this.smartSerialPortCom3.Close();
                     switch (this.SystemConfig.Serial3BaudRate)
                     {
                         case 0:
@@ -3028,8 +3231,7 @@ namespace INT69DB_2A.Forms
                             this.smartSerialPortCom3.Baud_Rate = SmartSerialPort.BAUDRATE._9600bps;
                             break;
                     }
-                    if (this.smartSerialPortCom3.IsOpen == false)
-                        this.smartSerialPortCom3.Open();
+                    this.smartSerialPortCom3.Open();
                 }
                 catch
                 {
@@ -3047,6 +3249,8 @@ namespace INT69DB_2A.Forms
         public void UartCom3Write(string data)
         {
             this.smartSerialPortCom3.WriteFrame(data, SmartSerialPort.CODETYPES.ASCIICODE);
+
+            //this.smartFileCom3Log.WriteString(string.Format("COM3 Send ({0:yyyy-MM-dd HH:mm:ss}): {1}", DateTime.Now, data));
         }
         private int UartCom3Write(string command, string id, string address, string data)
         {
@@ -3070,7 +3274,7 @@ namespace INT69DB_2A.Forms
             return ret;
         }
 
-        private void TreatSerialCommunication(Collection<WeightData> datas)
+        public void TreatSerialCommunication(Collection<WeightData> datas)
         {
             if (this.SystemConfig.Serial3Mode == 0)
                 return;
@@ -3089,6 +3293,8 @@ namespace INT69DB_2A.Forms
             }
             else if (this.SystemConfig.Serial3Mode == 5)     // OPT4
                 this.UartCom3Write(this.Protocol_OPT4_NotStxEtx(this.CollectionWeightData));
+            else if (this.SystemConfig.Serial3Mode == 6)      // OPT5
+                this.UartCom3Write(this.Protocol_OPT5_NotStxEtx(this.CollectionWeightData));
         }
         private void TreatSerialCommunication(int lane, WeightData data)
         {
@@ -3109,6 +3315,8 @@ namespace INT69DB_2A.Forms
             }
             else if (this.SystemConfig.Serial3Mode == 5)     // OPT4
                 this.UartCom3Write(this.Protocol_OPT4_NotStxEtx(lane, data));
+            else if (this.SystemConfig.Serial3Mode == 6)     // OPT5
+                this.UartCom3Write(this.Protocol_OPT5_NotStxEtx(lane, data));
         }
         #endregion
         #region Ethernet
@@ -3151,6 +3359,11 @@ namespace INT69DB_2A.Forms
                 sendData = this.Protocol_OPT4(this.CollectionWeightData);
                 this.SendEthernetData(sendData);
             }
+            else if (this.SystemConfig.EthernetMode == (int)DataStore.EthernetMode.f6_OPT5)
+            {
+                sendData = this.Protocol_OPT5(this.CollectionWeightData);
+                this.SendEthernetData(sendData);
+            }
         }
         private void TreatEthernetCommunication(int lane, WeightData data)
         {
@@ -5519,7 +5732,7 @@ namespace INT69DB_2A.Forms
 
                             #region 통신
                             this.TreatSerialCommunication(this.CollectionWeightData);
-                            this.TreatEthernetCommunication(this.CollectionWeightData); 
+                            this.TreatEthernetCommunication(this.CollectionWeightData);
                             #endregion
 
                             #region ACNC(Alarm Continuous Ng Count)

INT69DB_2A/Forms/FormMain.resx

@@ -153,6 +153,9 @@
   <metadata name="smartSerialPortCom3.TrayLocation" type="System.Drawing.Point, System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
     <value>494, 56</value>
   </metadata>
+  <metadata name="smartFileCom3Log.TrayLocation" type="System.Drawing.Point, System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
+    <value>676, 54</value>
+  </metadata>
   <metadata name="$this.FormFactorShadowProperty" xml:space="preserve">
     <value>WEBPAD</value>
   </metadata>

INT69DB_2A/Forms/FormMainDisplay.cs

@@ -747,7 +747,7 @@ namespace INT69DB_2A.Forms
                 this.UpdateDisplayButton(SmartButton.BUTSTATUS.DOWN, SmartButton.BUTSTATUS.UP, SmartButton.BUTSTATUS.UP);
                 #endregion
             }
-            else if (displayForm == DataStore.MainDisplayStore.LineGraph)
+            else if (displayForm == DataStore.MainDisplayStore.DotGraph)
             {
                 #region DotGraph
                 switch (this.ParentForm.SystemConfig.EquipmentColumns)
@@ -2852,7 +2852,7 @@ namespace INT69DB_2A.Forms
             if (button == this.buttonBarGraphForm)
                 this.MainDisplay = DataStore.MainDisplayStore.BarGraph;
             else if (button == this.buttonDotGraphForm)
-                this.MainDisplay = DataStore.MainDisplayStore.LineGraph;
+                this.MainDisplay = DataStore.MainDisplayStore.DotGraph;
             else if (button == this.buttonTableForm)
                 this.MainDisplay = DataStore.MainDisplayStore.Table;
             else

INT69DB_2A/Forms/FormUserEditor.cs

@@ -290,7 +290,8 @@ namespace INT69DB_2A.Forms
 
                 if (this.SelectedUserItem.Group == DataStore.UserGroup.Admin)
                 {
-                    item.ActiveLevel = 9;
+                    if (this.ParentForm.SystemConfig.IsPart11 == true)
+                        item.ActiveLevel = 9;
                 }
                 else
                 {

INT69DB_2A/Version.txt

@@ -14,15 +14,29 @@
 	멀티형 2~6열 스틱 계량기
 */
 
-@ Ver 5.2.2 by LSJ
-	- 2024.08.28
-	- Ver 5.2.1 Modify
+@ Ver 5.3.0 by LSJ
+	- 2025.02.07
+	- Ver 5.2.2 Modify
 	- Framework : SmartX Framework V3.1.1(update: 2019.03.21)
+	- 영테크팩 요청사항 추가 
+	  V6.3.0 - OPT5 추가
+	- 메시지 박스 사이즈 변경
+	  영문 4-13 메시지 짤리는 문제로 사이즈 늘림
+
+@ Ver 5.2.2 by LSJ
+	- 2024.12.05
+	- Ver 5.2.0 Modify
+	- Framework : SmartX Framework V3.1.1(update: 2019.03.21)
+	- 버그수정
+	  환경설정-소수점 변경시 저장안되는 버그 수정
 	- Part11 관련 수정
 	  OtherBackup() 시 헤더파일에 파라미터 누락
          header.EquipmentType = 103;
-    - 2024.11.08
-	- 로그인 Admin 비밀번호 변경 시 Level1로 변경되는 문제 수정
+    - XY 그래프 화면 데이터 갯수 수정
+      draw.SetChartCfg(103, 310, 627, 290, 2, SmartX.SmartDraw.CHARTREFRESH.LEFTSCROLL, 1);
+        -> draw.SetChartCfg(103, 310, 627, 290, 16, SmartX.SmartDraw.CHARTREFRESH.LEFTSCROLL, 1);
+      627/2 = 313
+      627/16 = 39
 
 @ Ver 5.2.1 by CJY
 	- 2024.08.21